MK3 Heated Bed 214x214mm for RepRap 3D Printers
Sold out
What is this?
The new MK3 Aluminum heated beds have a few advantages over the older MK2 and MK2B heated bed designs. The aluminum backing in the MK3 acts as a thermal...
What can I build with it?
- General electronics and robotics prototyping
- Open AI Lab with “MK3 Heated Bed 214x214mm for RepRap 3D P” to explore a parts list
Compatibility notes
No verified pin/voltage metadata in our engineering catalog for this title. Treat electrical details as unverified until you check the datasheet.
Specifications
- MK3 Heatbed Heated Bed Heat Bed 214x214x3mm Aluminum PCB Board Heat Bed 12V/24V Dual Power for RepRap 3D Printer
- Notify me if back in stock
- Wiring Method:
- Specifications:
- Enter your email address to be notified if the product becomes available again.
- The new MK3 Aluminum heated beds have a few advantages over the older MK2 and MK2B heated bed designs. The aluminum backing in the MK3 acts as a thermal buffer, building up heat much more evenly than the older PCB designs. Because of this aluminum layer, the MK3 is also flat enough to print directly on – no need for a separate piece of glass!
- These heated beds are wired the same way as the older MK2 designs – the board accepts 12 or 24V power. Simply solder your wires to the pads indicated.
- There’s space for SMD LEDs and a resistor, and a hole in the centre for a thermistor.
- The board mounts the same way as the older designs – there’s a 3mm screw hole in each corner in the same spacing as the MK2 boards, plus an extra screw hole between the solder pads to allow for 3-point mounting. 3-point mounting makes it much easier to get the bed leveled correctly, but your printer will need a matching screw hole in the right spot
Listed from catalog data. Treat as merchant-provided, not independently lab-verified, unless noted above.
What else you may need
Related items in the same category — check compatibility yourself.
3d Printing
2mm Hex Allen Key For CNC And 3D Printer
3d Printing
NEMA Stepper Motor Steel and Rubber Vibration Dampers for 3D Printer In Pakistan
3d Printing
Laser Module 650NM 5V Laser Module | HALLROAD
3d Printing
Extrusion Corner | Fixed Block | L-Type Internal 20x20 - Internal 20x20 & L-Type Options
Buying notes for Pakistan makers
Buy MK3 Heated Bed 214x214mm for RepRap 3D Printers online in Pakistan with live PKR pricing from Robotics Kits — a clear catalog alternative when comparing Hall Road Lahore, Digilog, and Electrobes for 3d Printing.
MK3 Heated Bed 214x214mm for RepRap 3D Printers suits ESP32, Arduino, robotics, IoT, and FYP builds; check real stock on Robotics Kits before you finalize a BOM or wiring plan.
Order MK3 Heated Bed 214x214mm for RepRap 3D Printers with COD or digital payment across Pakistan, then use AI Lab to plan compatible sensors, modules, and robotics parts around this component.
Customer reviews
Log in to leave a review.
No reviews yet.